How is non-woven fabric made
About non-woven fabric:
How is non-woven fabric made?
Non-woven fabrics are created through a process of layering and bonding fibers together. The first step in the process is to create a web of fibers, which can be done using one of two methods.
In the air-laying method, loose fibers are blown onto a moving belt or screen; while in the water-laying method, fibers are suspended in water and extruded through a small hole, where they are then deposited onto a conveyor belt.
Non-woven fabrics are made in a variety of ways. One way is to use a wet laid process. In this process, the fibers are first mixed with water into a thin slurry.
This mixture is then poured onto a moving mesh belt, where the water drains away and the fibers are left behind in a random pattern. The belt then carries the fabric to the drying area, where it is heated to remove the remaining water and set the fibers in place.
Non-woven fabrics are made in a variety of ways, but all methods start with either fibers or yarns. The fibers or yarns are then combined and bonded together to create a web or sheet. There are several ways to do this, but the most common is through heat and pressure.
Non-woven fabrics are made in a variety of ways, but the most common is through the use of heat and pressure. The fabric is placed between two large rollers, which are then heated.
This causes the fabric to become soft and malleable. The pressure from the rollers then compresses the fabric and creates a bond between the individual fibers.
Non-woven fabrics are made by bonding or entangling fibers together, rather than weaving them together on a loom. There are numerous ways to produce non-woven fabrics, but the most common method is through the use of heat, pressure, and chemicals.
About JEENOR material
Hangzhou Jeenor Industrial Co., Ltd., manufacturers and converts nonwoven materials at factories in Hangzhou-near Ningbo port and Shanghai port. The company was founded in 2008, formerly called Hangzhou Jeenor Cleaning Supply Co., Ltd.With roots in spunlace nonwovens, we began producing in 2008 on one line, expanded these two years with two additional spunlace lines, and can currently make 9,000 tons of spunlace nonwovens in widths ranging from 1.5 to 3.5 meters per year.
